Ortofon 2MR Bronze Cartridge for Rega Turntables
Ortofon 2MR Bronze Cartridge for Rega Turntables
This is a low profile version of the Ortofon 2M Bronze, tailor made for Rega turntables. This eliminates the need for adding shims to the base of the arm to get the correct height. We have chosen to stock the Bronze as it is the best value in the line but we can order any of the 2MR series at your request.
2MR Bronze Specifications
Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Bronze
2MR cartridge weight - 6 g